↓ Skip to main content

Influence of operational parameters on the fluid-side mass transfer resistance observed in a packed bed bioreactor

Overview of attention for article published in AMB Express, May 2015
Altmetric Badge

Mentioned by

twitter
2 X users

Citations

dimensions_citation
4 Dimensions

Readers on

mendeley
12 Mendeley
Title
Influence of operational parameters on the fluid-side mass transfer resistance observed in a packed bed bioreactor
Published in
AMB Express, May 2015
DOI 10.1186/s13568-015-0111-x
Pubmed ID
Authors

Amir Hussain, Martin Kangwa, Ahmed Gad Abo-Elwafa, Marcelo Fernandez-Lahore

Abstract

The influence of mass transfer on productivity as well as the performance of packed bed bioreactor was determined by varying a number of parameters; flow rate, glucose concentration and polymers (chitosan). Saccharomyces cerevisiae cells were immobilized in chitosan and non-chitosan coated alginate beads to demonstrate the effect on external mass transfer by substrate consumption time, lag phase and ethanol production. The results indicate that coating has a significant effect on the lag phase duration, being 30-40 min higher than non-coated beads. After lag phase, no significant change was observed in both types of beads on consumption of glucose with the same flow rate. It was observed that by increasing flow rates; lag phase and glucose consumption time decreased. The reason is due to the reduction of external mass transfer as a result of increase in flow rate as glucose is easily transported to and from the beads surface by diffusion. It is observed that chitosan acts as barrier for transfer of substrate and products, in and out of beads, at initial time of fermentation as it shows longer lag phase for chitosan coated beads than non-coated. Glucose consumption at low flow rate was lower as compared to higher flow rates. The optimum combination of parameters consisting of higher flow rates 30-90 ml/min and between 10 and 20 g/l of glucose was found for maximum production of ethanol.

X Demographics

X Demographics

The data shown below were collected from the profiles of 2 X users who shared this research output. Click here to find out more about how the information was compiled.
Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 12 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Thailand 1 8%
Unknown 11 92%

Demographic breakdown

Readers by professional status Count As %
Researcher 4 33%
Student > Ph. D. Student 3 25%
Student > Bachelor 2 17%
Student > Master 1 8%
Professor 1 8%
Other 0 0%
Unknown 1 8%
Readers by discipline Count As %
Agricultural and Biological Sciences 4 33%
Environmental Science 2 17%
Engineering 2 17%
Biochemistry, Genetics and Molecular Biology 1 8%
Chemistry 1 8%
Other 1 8%
Unknown 1 8%
Attention Score in Context

Attention Score in Context

This research output has an Altmetric Attention Score of 1. This is our high-level measure of the quality and quantity of online attention that it has received. This Attention Score, as well as the ranking and number of research outputs shown below, was calculated when the research output was last mentioned on 16 May 2015.
All research outputs
#18,407,102
of 22,803,211 outputs
Outputs from AMB Express
#800
of 1,234 outputs
Outputs of similar age
#192,630
of 264,364 outputs
Outputs of similar age from AMB Express
#14
of 15 outputs
Altmetric has tracked 22,803,211 research outputs across all sources so far. This one is in the 11th percentile – i.e., 11% of other outputs scored the same or lower than it.
So far Altmetric has tracked 1,234 research outputs from this source. They receive a mean Attention Score of 2.8. This one is in the 21st percentile – i.e., 21% of its peers scored the same or lower than it.
Older research outputs will score higher simply because they've had more time to accumulate mentions. To account for age we can compare this Altmetric Attention Score to the 264,364 tracked outputs that were published within six weeks on either side of this one in any source. This one is in the 15th percentile – i.e., 15% of its contemporaries scored the same or lower than it.
We're also able to compare this research output to 15 others from the same source and published within six weeks on either side of this one. This one is in the 1st percentile – i.e., 1% of its contemporaries scored the same or lower than it.